Wildt Brothers Incorporated Automotive Repair Tech Question on Your Fuel PumpNov 5th, 2013
Wildt Brothers Incorporated Automotive Repair Tech Question:
I was driving on a local Louisville road and my vehicle started sputtering and then the engine finally quit and I couldn't get it started. I was towed to a shop in Louisville and found out I had to replace my fuel pump.
What could I have done to have saved my fuel pump?
Wildt Brothers Incorporated Automotive Repair Answer:
This is a tough one for Louisville residents because there isn't any maintenance recommended for fuel pumps. They're inside the fuel tank and you really can't get to them without removing the tank. But Louisville drivers can do some things to make their job easier so they last a little longer.
A lot of vehicles are equipped with a fuel filter on their gas line. This filters out dirt and rust from the gas tank before it gets to the engine. Replacing a clogged fuel filter as recommended reduces the strain on your fuel pump.
Many newer vehicles driving around Louisville have their fuel filter inside the fuel tank so it cannot be changed. A good tip for KY residents is to not run the fuel tank too low; this can cause fuel starvation that excessively wears the pump. Also, you can't go wrong using good quality gas with high levels of detergent. This helps prevent the buildup of varnish and gum all along the fuel system.
A professional fuel system cleaning will clean fuel injectors and help remove carbon deposits from the valves and combustion chamber.
All these things improve fuel economy and increase performance for Louisville residents. Ask your professionally trained service advisor at Wildt Brothers Incorporated Automotive Repair if a fuel system cleaning is recommended.
Stop by or give us a call.
Wildt Brothers Incorporated Automotive Repair
600 Lyndon Lane
Louisville, KY 40222
At Wildt Brothers Incorporated Automotive Repair we install quality NAPA replacement parts.